February 2, 2016

ONetSwitch30

600px-1-85

ONetSwitch30 is an All Programmable open networking innovation platform.

ONetSwitch30 is based on the Xilinx Zynq-7000 SoC, and mainly adopts the Gigabit ports. It can achieve a comprehensive experiment platform integrating calculations, storage, networks and interconnection by extension. Both its software and hardware can realize custom programming. Its reference designs are abundant and flexible, can be used to various researches on the evolution of network prototypes, and the development of customized network products. Especially, the features of the miniaturization and low power are adapted to the multi-node network tests and deployments.

Features

  • General
  • Main Silicon XC7Z030-2SBG485
  • Power Supply DC 12V
  • Primary Config. TF card
  • Auxiliary Config. QSPI flash/JTAG
  • Processing System
  • Processor _Dual ARM Cortex-A9@800MHz_
  • Cache (L1)32KB Inst. + 32KB Data per core; (L2)512KB; (OCM)256KB
  • DRAM DDR3 1GBytes
  • Flash Quad SPI flash 256Mb
  • DMA 8 channel (4 for Programmable Logic)
  • Ethernet 1x GE RJ45
  • Peripherals USB / USB-UART / USB JTAG / TF card
  • Programmable Logic
  • FPGA Logic 125K LCs, Kintex-7, ~1.9M ASIC gates
  • Host I/F AMBA AXI4 interconnect, max 100Gbps between PS-PL
  • DRAM DDR3 2GBytes
  • Ethernet 4x GE RJ45
  • Peripherals 2x PMOD
  • User IO user LEDs/push buttons/DIP switch
  • Extension mini PCIe for wireless NIC or SSD

Block Diagram

1-82.png

Board Layout

1-83.png

1-84.png

More information