Difference between revisions of "Web Cam 3-axis Servo Kit for Real Time Video for pcDuino"
Katherine.d (talk | contribs) |
|||
Line 2: | Line 2: | ||
− | Description | + | == Description == |
Line 9: | Line 9: | ||
[[File:Webcam assembly 1.jpg | 500px]] | [[File:Webcam assembly 1.jpg | 500px]] | ||
+ | |||
+ | == Webcam assembly steps == | ||
+ | *Step 1. Take out the camera | ||
+ | [[File:webcamass01.png]] | ||
+ | |||
+ | *Step 2. Remove the pin | ||
+ | [[File:webcamass02.png]] | ||
+ | |||
+ | [[File:webcamass03.png]] | ||
+ | |||
+ | *Step 3. Remove the screws from the bottom | ||
+ | [[File:webcamass04.png]] | ||
+ | |||
+ | *Step 4. In order to fixed camera and shelf. Drill a hole then fixed with screw | ||
+ | [[File:webcamass05.png]] | ||
+ | [[File:webcamass06.png]] | ||
+ | |||
+ | *Step 5. Transform the camera shelf,cut off two flanks and plane the cut smoothly | ||
+ | [[File:webcamass07.png]] | ||
+ | [[File:webcamass08.png]] | ||
+ | [[File:webcamass09.png]] | ||
+ | [[File:webcamass10.png]] | ||
+ | |||
+ | *Step 6. After transformation, aligned the shelf with the botton of camera, making a mark in order to drill the screw hole. | ||
+ | [[File:webcamass11.png]] | ||
+ | [[File:webcamass12.png]] | ||
+ | |||
+ | *Step 7. To avoid covering the two screws on the bottom of camera, we need to drill two more hole on the flanks. | ||
+ | [[File:webcamass13.png]] | ||
+ | [[File:webcamass14.png]] | ||
+ | [[File:webcamass15.png]] | ||
+ | |||
+ | *Step 8. Now,fasten the camera on the shelf with screws. | ||
+ | [[File:webcamass16.png]] | ||
+ | [[File:webcamass17.png]] | ||
+ | |||
+ | *Step 9. Install the camera,twist the screws. | ||
+ | [[File:webcamass18.png]] | ||
+ | [[File:webcamass19.png]] | ||
+ | |||
+ | *Step 10. Install Servo | ||
+ | [[File:webcamass20.png]] | ||
+ | |||
+ | *Step 11. Install the webcam stand,choose a properly hole. If the rocker arm is too long,cut off the unwanted parts. Fasten by the screw. | ||
+ | [[File:webcamass21.png]] | ||
+ | [[File:webcamass22.png]] | ||
+ | [[File:webcamass23.png]] | ||
+ | |||
+ | *Step 12. Disassembly the webcam stand, install another servo | ||
+ | [[File:webcamass24.png]] | ||
+ | [[File:webcamass25.png]] | ||
+ | [[File:webcamass26.png]] | ||
+ | |||
+ | *Step 13. Connect the camera and webcamstand | ||
+ | [[File:webcamass27.png]] | ||
+ | |||
+ | *Step 14. Trim the servo holder and install into the base panel.insert the stand into the base,fasten by screw. | ||
+ | [[File:webcamass28.png]] | ||
+ | [[File:webcamass29.png]] | ||
+ | [[File:webcamass30.png]] | ||
+ | [[File:webcamass31.png]] | ||
+ | [[File:webcamass32.png]] |
Revision as of 10:38, 15 May 2013
Description
This a kit that includes web cam, 2 mini servo, and a servo fixture to assemble a complete web cam servo as following:
Webcam assembly steps
- Step 1. Take out the camera
- Step 2. Remove the pin
- Step 3. Remove the screws from the bottom
- Step 4. In order to fixed camera and shelf. Drill a hole then fixed with screw
- Step 5. Transform the camera shelf,cut off two flanks and plane the cut smoothly
- Step 6. After transformation, aligned the shelf with the botton of camera, making a mark in order to drill the screw hole.
- Step 7. To avoid covering the two screws on the bottom of camera, we need to drill two more hole on the flanks.
- Step 8. Now,fasten the camera on the shelf with screws.
- Step 9. Install the camera,twist the screws.
- Step 10. Install Servo
- Step 11. Install the webcam stand,choose a properly hole. If the rocker arm is too long,cut off the unwanted parts. Fasten by the screw.
- Step 12. Disassembly the webcam stand, install another servo
- Step 13. Connect the camera and webcamstand
- Step 14. Trim the servo holder and install into the base panel.insert the stand into the base,fasten by screw.