Spruce

From LinkSprite Playgound
Revision as of 06:39, 29 March 2013 by Katherine.d (talk | contribs)
Jump to: navigation, search

Introduction

Spruce -LinkSprite STM32 ARM cortex board can be used with OpenJTAG and is compatible withmini ARM cortex-M3 board . It can be used in GCC+Eclipse+openocd+openJtag and Arduino enviroment! When used in Arduino enviroment, it is compatible with Maple.

Spruce has Arduino compatible shield pins, all the Arduino shields can be used on LinkSprite STM32 cortex board. Arduino similar IDE can be used to download Arduino code to Spruce board.

Spruce Hardware Resource

  • CPU: STM32F103VET6, TQFP 100 pins FLASH:512K BYTES, SRAM:64KBYTES
  • 1 JTAG debug interface
  • 1 power LED indicattor (Green), 1 status LED (Blue)
  • 1 RS232 port, Need crossover cable to talk to PC
  • Support 3 pin ISP
  • 1 USB2.0 SLAVE port
  • 1 Micro SD(TF) slot, uses SDIO
  • 1 SPI interfaced AT45DB161D(2M BYTES) serial FLASH
  • 1 functional botton
  • 1 RTC battery socket
  • 1 RJ45 Ethernet port
  • All unused GPIO pins are connected to external headers.
  • LCD NOT INCLUDED


Arduino IDE Environment

In Arduino IDE enviroment, it is fully compatible with maple, and all arduino shield. The bootloader is flashed through RS232 port, and the arduino program is downloaded frm USB port. The driver of the USB port can be found at the maple IDE, which can be downloaded from the maple IDE version for Spruce.


GCC+Eclipse+OpenOCD+OpenJTAG

Spruce also supports development using GCC+Eclipse+OpenOCD+OpenJTAG.


Schematic

Specification

Pin definition and Rating

Mechanic Dimensions

Usage

Hardware Installation

Programming

FAQ

Please list your question here:

Support

If you have questions or other better design ideas, you can go to our forum to discuss or creat a ticket for your issue at linksprite support.

Resources

How to buy

See Also

Other related products and resources.

Licensing

This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.