Difference between revisions of "RB-65CS: Servo with 360 Degree freedom"
| Line 1: | Line 1: | ||
[[File:RB_65CS_1.jpg]] | [[File:RB_65CS_1.jpg]] | ||
| − | '''Specifications | + | '''Specifications''' |
*Control System: +Pulse Width Control 1500usec Neutral | *Control System: +Pulse Width Control 1500usec Neutral | ||
Latest revision as of 07:19, 12 November 2012
Specifications
- Control System: +Pulse Width Control 1500usec Neutral
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: 0 to +60 Degree
- Operating Speed (4.8V): 0.14sec/60° at no load
- Operating Speed (6.0V): 0.12sec/60° at no load
- Stall Torque:(4.8V): 6kg·cm ;(6.0V): 6.5kg·cm
- Dead Band Width: 10usec
- Connector Wire Length: 300mm
- Dimensions: 40.8mm X 20.1mm X 38mm
- Weight: 40g
- Location of each pin: red (+),brown (-), yellow (signal)
Servo has three wires: Brown, Red and Orange. Brown is GND, Red is VCC, and should be connected to +5V, Orange is the control signal, which is PWM signal.
Note: Don't power your servo from USB port as USB port cannot provide enough current.
