Difference between revisions of "LS6410 SAMSUNG ARM11 S3C6410 board kit 4.3 TFT LCD"
Katherine.d (talk | contribs) |
Katherine.d (talk | contribs) |
||
| Line 3: | Line 3: | ||
LS6410 development board was developed by LinkSprite. It consists of motherboard and core board. Core board,[http://www.linksprite.com/product/showproduct.php?id=31&lang=en LS6410CORE]is a mature product that can be used in real product. | LS6410 development board was developed by LinkSprite. It consists of motherboard and core board. Core board,[http://www.linksprite.com/product/showproduct.php?id=31&lang=en LS6410CORE]is a mature product that can be used in real product. | ||
| − | model: KIT_LS6410_4P3 | + | model: KIT_LS6410_4P3 |
[[File:LS6410.jpg]] | [[File:LS6410.jpg]] | ||
== Features == | == Features == | ||
| + | *1. It uses highly integrated mature LS6410CORE board. | ||
| + | *2. It has 24 bit RGB interface, and has connector for IIC, SPI and touch bus. | ||
| + | *3. CVBS and TV output, all are after amplifier. | ||
| + | *4. USB Host 1.1 interface. | ||
| + | *5. USB OTG 2.0 interface. | ||
| + | *6. RJ45 100M Ethernet interface with 1:1.414 transformer. | ||
| + | *7. RS232 interface. | ||
| + | *8. Connector for SPI, IIC, 4 channel ADC, 3 channel external interrupt, and two channel TTL UART, expect ADC, all can be used as IO port. | ||
| + | *9. SD card interface. | ||
| + | *10. Cellphone keypad design | ||
| + | *11. LED indicators. | ||
| + | *12. Reset button | ||
| + | *13. 1.5W speaker connector | ||
| + | *14. MIC input circuit | ||
| + | *15. Headphone connector (PJ-327) | ||
| + | *16. Boot configuration switch | ||
| + | *17. Connector for SIMCOM's GPRS SIM300 module. | ||
| + | *18. PCB footprint for Sirf's GPS module. | ||
| + | *19. SDIO WIFI interface (with miniPCI interface) | ||
Revision as of 07:18, 7 March 2013
Description
LS6410 development board was developed by LinkSprite. It consists of motherboard and core board. Core board,LS6410COREis a mature product that can be used in real product.
model: KIT_LS6410_4P3
Features
- 1. It uses highly integrated mature LS6410CORE board.
- 2. It has 24 bit RGB interface, and has connector for IIC, SPI and touch bus.
- 3. CVBS and TV output, all are after amplifier.
- 4. USB Host 1.1 interface.
- 5. USB OTG 2.0 interface.
- 6. RJ45 100M Ethernet interface with 1:1.414 transformer.
- 7. RS232 interface.
- 8. Connector for SPI, IIC, 4 channel ADC, 3 channel external interrupt, and two channel TTL UART, expect ADC, all can be used as IO port.
- 9. SD card interface.
- 10. Cellphone keypad design
- 11. LED indicators.
- 12. Reset button
- 13. 1.5W speaker connector
- 14. MIC input circuit
- 15. Headphone connector (PJ-327)
- 16. Boot configuration switch
- 17. Connector for SIMCOM's GPRS SIM300 module.
- 18. PCB footprint for Sirf's GPS module.
- 19. SDIO WIFI interface (with miniPCI interface)
