Basic 16x2 Character LCD - Black on Green 5V

From LinkSprite Playgound
Revision as of 02:12, 27 April 2013 by Katherine.d (talk | contribs)
Jump to: navigation, search

This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight.


Works on either 4 bit or 8 bit mode. For Arduino LCD library, Please refer to http://arduino.cc/en/Reference/LiquidCrystal?from=Tutorial.LCDLibrary.

Connections to Arduino:

The circuit:

  • LCD RS pin to digital pin 12


  • LCD Enable pin to digital pin 11


  • LCD D4 pin to digital pin 5


  • LCD D5 pin to digital pin 4


  • LCD D6 pin to digital pin 3


  • LCD D7 pin to digital pin 2


Parallel LCDs run off of +5V so you can just solder the Vcc (pin 2 in LCD)wire to 5V and the ground (pin 1 in LCD) wire to GND.


* 10K resistor:
* ends to +5V and ground
* wiper to LCD VO pin (pin 3)


How to run Arduino examples:



Documents:

GDM1602K.pdf Extended Datasheet Dimensions: 3.15" x 1.425"