Difference between revisions of "Basic 16x2 Character LCD - Black on Green 5V"
Katherine.d (talk | contribs) |
Katherine.d (talk | contribs) |
||
Line 7: | Line 7: | ||
=== Connections to Arduino === | === Connections to Arduino === | ||
− | + | The circuit: | |
* LCD RS pin to digital pin 12 | * LCD RS pin to digital pin 12 | ||
Line 40: | Line 40: | ||
=== How to run Arduino examples === | === How to run Arduino examples === | ||
[[File:LCD.jpg]] | [[File:LCD.jpg]] | ||
− | |||
− | |||
Line 48: | Line 46: | ||
GDM1602K.pdf | GDM1602K.pdf | ||
Extended Datasheet | Extended Datasheet | ||
− | |||
== Dimensions == | == Dimensions == | ||
3.15" x 1.425" | 3.15" x 1.425" |
Revision as of 03:24, 27 April 2013
Contents
Description
This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight.
Works on either 4 bit or 8 bit mode. For Arduino LCD library, Please refer to http://arduino.cc/en/Reference/LiquidCrystal?from=Tutorial.LCDLibrary.
Connections to Arduino
The circuit:
- LCD RS pin to digital pin 12
- LCD Enable pin to digital pin 11
- LCD D4 pin to digital pin 5
- LCD D5 pin to digital pin 4
- LCD D6 pin to digital pin 3
- LCD D7 pin to digital pin 2
Parallel LCDs run off of +5V so you can just solder the Vcc (pin 2 in LCD)wire to 5V and the ground (pin 1 in LCD) wire to GND.
- 10K resistor:
- ends to +5V and ground
- wiper to LCD VO pin (pin 3)
How to run Arduino examples
Documents
GDM1602K.pdf Extended Datasheet
Dimensions
3.15" x 1.425"