Difference between revisions of "Basic 16x2 Character LCD - Black on Green 5V"
Katherine.d (talk | contribs) |
Katherine.d (talk | contribs) |
||
Line 1: | Line 1: | ||
+ | == Description == | ||
This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight. | This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight. | ||
− | |||
Works on either 4 bit or 8 bit mode. For Arduino LCD library, Please refer to http://arduino.cc/en/Reference/LiquidCrystal?from=Tutorial.LCDLibrary. | Works on either 4 bit or 8 bit mode. For Arduino LCD library, Please refer to http://arduino.cc/en/Reference/LiquidCrystal?from=Tutorial.LCDLibrary. | ||
− | Connections to Arduino | + | === Connections to Arduino === |
'''The circuit:''' | '''The circuit:''' | ||
Line 30: | Line 30: | ||
− | |||
* 10K resistor: | * 10K resistor: | ||
Line 39: | Line 38: | ||
− | How to run Arduino examples | + | === How to run Arduino examples === |
[[File:LCD.jpg]] | [[File:LCD.jpg]] | ||
Revision as of 03:04, 27 April 2013
Contents
Description
This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight.
Works on either 4 bit or 8 bit mode. For Arduino LCD library, Please refer to http://arduino.cc/en/Reference/LiquidCrystal?from=Tutorial.LCDLibrary.
Connections to Arduino
The circuit:
- LCD RS pin to digital pin 12
- LCD Enable pin to digital pin 11
- LCD D4 pin to digital pin 5
- LCD D5 pin to digital pin 4
- LCD D6 pin to digital pin 3
- LCD D7 pin to digital pin 2
Parallel LCDs run off of +5V so you can just solder the Vcc (pin 2 in LCD)wire to 5V and the ground (pin 1 in LCD) wire to GND.
- 10K resistor:
- ends to +5V and ground
- wiper to LCD VO pin (pin 3)
How to run Arduino examples
Documents
GDM1602K.pdf Extended Datasheet
Dimensions
3.15" x 1.425"