Advanced Sensors Kit for Arduino

From LinkSprite Playgound
Revision as of 22:07, 9 July 2014 by Jingfeng (talk | contribs)
Jump to: navigation, search
Item Picture Description
KY001:

Temperature Sensor Module

KY001.png

This module measures the temperature and reports it through the 1-wire bus digitally to the Arduino.

KY002:

Shock Sensor Module

KY002.png

This module is digital shock sensor. It will output a high level signal when it detects a shock event.

KY003:

Hall Magnetic Field Sensor Module

KY003.png

This module can be used to detect the presence of an magnetic field. If there is an magnetic field present, it will report a high level signal.

KY004:

Momentary Button Module

KY004.png

This is a button module. When the button is pressed, it will a high level signal.

KY005:

Infrared Transmitter Module

KY005.png

This is an infrared transmitter module that is used to emit infrared signal.

KY006:

Buzzer Module

KY006.png

This is an active buzzer module that can make different sound.

KY008:

Laser Diode Module

KY008.png

This is a laser emitter diode. The working voltage is 5V, with a wavelength of 650nm.

KY009:

RGB three colors LEDs module

Ky009.jpg

This is a surface mount three-color LED module that can make any color we want by combing different intensities of Red, Blue and Green.

KY010:

Light Block Sensor Module

KY010.png

This is a light block sensor module, where there is an object in the middle of the U shape. The sensor will output a high level signal.

KY011:

Dual Light LEDs module

Ky011.jpg

This is a dual color LED module.

KY012:

Buzzer Module

Ky012.jpg

This is a nonactive buzzer module.

KY013:

Analog Temperature Sensor

Ky013.jpg

This is an analog temperature sensor that outputs it voltage in proportional to the temperature.

KY015:

Temprature and Humidity Sensor

Ky015.jpg

This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity sensor complex,ensureing the high reliability and excellent long-term stability. A high-performance 8-bit microcontroller is connected. This sensor includes a resistive element and a sense of wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high cost performance advantages.

KY016:

RGB three colors LED module

Ky016.jpg

This is a through the hole three-color LED module that can make any color we want by combing different intensities of Red, Blue and Green.

KY017:

Quicksilver Switch Module

Ky017.jpg

A tilt switch that can turn on and off depending on the tilt position. The switch is mercury.

KY018:

Optosensor Module

Ky018.jpg

Photoresistors are semiconductor photosensitive devices, in addition to having high sensitivity, fast response, consistent with the spectral characteristics and value of good features Under a high temperature, and humidity in harsh environments, it also can maintain a high degree of stability and reliability Wide pan used cameras, solar garden lights, lawn, detectors, clock, music, cups, gift boxes, mini-night light, light voice switches, lights automatically switch toys and a variety of light control, light control lighting, lamps and other light automatic opening control field

KY019:

5V DC Relay Module

Ky019.jpg

This is 1 channel relay module with the following spec:

  • Can be used as microcontroller development board module can be used as home appliance control
  • 5 V-12V to TTL control signal
  • The control signal DC or AC, 220V AC load can be controlled.
  • There is a normally open and one normally closed contact
  • A power indicator light
  • A control indicator, pull off, disconnect does not shine
  • Aransistor drive to increase the relay coil control pins high impedance.
  • A control pin has a pull-down circuit to prevent malfunction relay vacant
KY020:

Tilt Switch Module

Ky020.jpg

Tilt switch module and a digital interface, built-in 13 LED build a simple circuit to produce tilt warning lamp 13 comes with digital interfaces of the LED, the tilt switch sensor interface to access digital 3,when the tilt open Off sensor senses a key signal, LED lights, otherwise off.

KY021:

Mini Reed Switch Module

Ky021.jpg

Reed module and the interface comes with digital 13 LED build a simple circuit to produce a Reed warning lamp 13 comes with digital interfaces of the LED, the Reed sensor access number 3 interface, when Reed sensors Sensed a key signal, LED lights, otherwise off.

KY022:

Infrared Receiver Module

Ky022.jpg

This is the infrared receiver module, with the following features:

  • The infrared receiver module is 1838 Infrared receiver
  • Acceptance angle: 90 °,
  • Operating voltage: 7-5.5V.
  • Frequency: 37.9KHZ,
  • Receiving distance: 18Meter.
  • Using inside and outside the double-shielded package structure
  • Anti-light, electromagnetic interference capability, built-in infrared dedicated IC Can in 500 LUX Light intensity to work properly.
  • Widely used in: stereo, TV, VCR, disc players, set-top boxes, digital photo frame, car audio, remote control toys, satellite receiver, hard disk player, air conditioners, heaters, fans, lighting and other household appliances.
KY023:

Mini Dual Axis JoyStick

Ky023.jpg
On the principle, the control rod can be considered that it is organized  by the two potentiometer and a button.When using, it can connect with Arduino sensor shield,and connect Arduino corresponding pins through Arduino sensor cables.  It as the following spec:
  • Directional movements are simply two potentiometers - one for each axis
  • Compatible with Arduino interface
  • The biaxial XY Joystick Module KY-023 applies ARDUINO
  • Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
  • 5 Pin
  • Arduino Sample Code
KY024:

Linear magnetic Hall sensor

Ky024.jpg
KY025:

Big Reed Switch Module

Ky025.jpg
KY026:

Flame Sensor Module

Ky026.jpg
KY027:

Magic LED cup Module

Ky027.jpg
KY028:

Digital Temprateure Sensor Module

Ky028.jpg
KY031:

Shock Sensor Module

Ky031.jpg
KY032:

Obstacle Sensor Module

Ky032.jpg
KY033:

Line follow Sensor Module

Ky033.jpg
KY034:

7 Colors LED Blinking Module

Ky034.jpg
KY035:

Hall Sensor Module

Ky035.jpg
KY036:

Metal Touch Sensor Module

Ky036.jpg
KY037:

High Sensitive Microphone Module

Ky037.jpg
KY038:

Microphone Module

Ky038.jpg
KY039:

Heatbeat Sensor Module

Ky039.jpg
KY040:

Rotation Encoder Module

Ky040.jpg