Difference between revisions of "ATWIN Quad-band GPRS/GSM Shield for Arduino"

From LinkSprite Playgound
Jump to: navigation, search
(Introduction)
(Application Ideas)
Line 125: Line 125:
  
 
== Application Ideas  ==
 
== Application Ideas  ==
Arduino Passthrough Sample Code for LinkSprite ATWIN GPRS/GSM Shield
+
'''Arduino Passthrough Sample Code for LinkSprite ATWIN GPRS/GSM Shield'''
 
*[http://www.linksprite.com/download/showdownload.php?id=198&lang=en Download Sample Code]
 
*[http://www.linksprite.com/download/showdownload.php?id=198&lang=en Download Sample Code]
  

Revision as of 03:19, 12 November 2012

Introduction

This LinkSprite ATWIN Quad-band GPRS/GSM shield has PCB etched antenna, so no need for external antenna.

ATWIN Quad-band GPRS/GSM shield is an ultra compact and high quality wireless module base on infineon UCL2 platform with industy-standard interface.

This is a SMT package with small dimension, low power consumption, quad-band (AT139) and dual-band (AT139D) GSM/GPRS module.

It can provide with voice, SMS, Fax, data applicationgs for customers.

Description:Video Intro


Model: ATGPRS_SHIELD

4 ATWIN.jpg

Features

Features Description
Network GSM/GPRS
Frequency Bands AT139: GSM850/GSM900/DCS1800/PCS1900MHz AT139D:GSM900/DCS1800MHz
RF Output Power AT139: GSM850/GSM900: 33dBm, DCS1800/PCS1900: 30dBm AT139D:GSM900: 33dBm, DCS1800: 30dBm
RF Receive Sensitivity <-108dBm
Speech codec modes FR、EFR、HR、AMR
SMS TEXT/PDU
GPRS Connectivity GPRS Class 10
Coding Scheme:CS1,CS2,CS3,CS4
Physical Characteristics
Package SMT
Dimensions 24(±0.1)*24(±0.1)*3(±0.1)mm
Weight 4g
Performance
Power Supply 3.3V~4.5V
Antenna External Antenna
MCP 64Mb NOR + 32Mb PSRAM
Audio Two input/output Audio channels
SIM Card Application Support SIM Card:1.8V/3.0V
Pin Amounts 38 PINs
Firmware
Operating System OSE

Application Ideas

Arduino Passthrough Sample Code for LinkSprite ATWIN GPRS/GSM Shield

This sample code requires

Previous:Arduino Sample Code for Mamba Shield (Arduino 1.0.1)

Cautions

The warnings and wrong operations possible cause dangerous.

Schematic

Specification

May include key specification and other specifications.

Pin definition and Rating

Mechanic Dimensions

Usage

Hardware Installation

The shield must be powered by a wall adapter with 12V, 1A, like this one: PW-12VDC-1A_X3

  • RX jump to MRX, TX jump to MTX, and remove the atmega328P from arduino. By doing this, we can directly monitor serial port output using the USB port.The default baud rate is 115200.
  • Now we are going to use atmega328P's UART to talk to USB, and soft serial of atmega328P to talk to ATWIN.
  • Before we do that, we have to change ATWIN's data rate to 9600 as soft serial can't go to 119200.In first tutorial setup, do: AT+IPR=9600 to set the baud rate to 9600
  • Now set the jumper RX to D3, and TX to D2. SO that atmega328P's UART to talk to USB and soft serial of atmega328P to talk to ATWIN:
/*
*/
#include   //Include the NewSoftSerial library to send serial commands to the cellular module.
#include          //Used for string manipulations
char incoming_char=0;      //Will hold the incoming character from the Serial Port.
NewSoftSerial cell(2,3);  //Create a 'fake' serial port. Pin 2 is the Rx pin, pin 3 is the Tx pin.
void setup()
{
  //Initialize serial ports for communication.
Serial.begin(9600);
cell.begin(9600);
Serial.println("Starting ATWIN Communication...");
}
void loop()
{
//If a character comes in from the cellular module...
if(cell.available() >0)
{
incoming_char=cell.read();    //Get the character from the cellular serial port.
Serial.print(incoming_char);  //Print the incoming character to the terminal.
}
//If a character is coming from the terminal to the Arduino...
if(Serial.available() >0)
{
incoming_char=Serial.read();  //Get the character coming from the terminal
cell.print(incoming_char);    //Send the character to the cellular module.
}
}


Programming

FAQ

Please list your question here:

Support

If you have questions or other better design ideas, you can go to our forum to discuss.

Resources

How to buy

Here to buy ATWIN Quad-band GPRS/GSM Shield for Arduino SOLID_ATGPRS_SHIELD on LinkSprite Cart

See Also

Other related products and resources.

Licensing

This documentation is licensed under the Creative Commons Attribution-ShareAlike License 3.0 Source code and libraries are licensed under GPL/LGPL, see source code files for details.