LinkSprite DMX512 High Speed Powerline Communication Module
This is DMX512 version of LinkSprite High Speed Powerline Communication Module. It's DMX512 protocol transparent powerline communication module.
Use your power line (DC or main power) as the DMX512 control cable!
LinkSprite's broadband powerline communication module (5Mbps throughput on the powerline). Based on the feedbacks of LinkSprite narrow band powerline communication modem, broadband modems are consisted of a PLC-UART motherboard, UART-RS232 daughter board, UART-RS485 daughter board, UART-USB daughter board, UART-Zigbee daughter board and UART-Ethernet daughter board.
On the PLC-UART motherboard, there is a 20-pin 2mm spacing receptacle, users can choose different daughter boards based on the interface needs. This 20-pin receptacle is also pin-compatible with Xbee module from Digi (http://www.digi.com/).
The PLC-UART motherboard also support DIP by optional pins that can be used to directly plug to user's board without doing screwing. The interface board signals such as RS232/RS485/USB signals are also routed back to motherboard through the 20-pin receptacle, and again to users' board through these DIP pins.
Powerline communication transceiver modules from LinkSprite (LinkSprite modules) are transceiver modules designed to send/receiver serial data over the powerline network. PLC-UART is designed to transparently move serial data over the powerline network, and achieves the target of replacing cables by the ubiquitous powerline network.
Recommended wall adapter 5V 2A: http://www.cutedigi.com/product_info.php?products_id=4455
- AC and DC powerline Communications
- Fully transparent mode, plug and play coming out of the box without the need to do any programming.
- Homeplug 1.0
- 5Mbps throughput on the power line
- Built-in error correction codes.
- AT commands used for advanced configuration.
- 3.3V TTL UART, Optional RS232, RS485. USB, Ethernet, Zigbee interfaces
720-204-8599 (MST: 9:00am-5:00pm)
720-279-0774 (MST: 6:00pm- 3:00am)